MS-136W (12oz Aerosol)
MS-145W (Qt, Gal, 5G, 55G)
PTFE Release Agents, MS-136W and MS-145W are ideal for elastomers, including natural and synthetic rubber, EPDM, NBR, silicone,
Viton® and neoprene, and most plastics and resins. There is no discernible transfer or migration. Nonflammable. No
ODC. For applying to preheated molds 212ºF/100ºC to 550ºF/285ºC. MS-136W and MS-145W will not activate below 212ºF/100ºC. For
aerosol applications where molds are below 212ºF, use MS-122AD, AX, RB, or XD. For bulk liquid applications where molds
are below 212ºF, use MS-143XD, A0305B, A1229B, MS-143E, or MS-143H.
MS-136E (12oz Aerosol)
MS-136E-2 (12oz Aerosol)
MS-145E (Qt,
Gal, 5G, 55G)
Economical, fluoropolymer release agents with the same general applications as MS-136W and MS-145W. For applying
to preheated molds 200ºF/93ºC to 220ºF/104ºC. Must be heat cured 320ºF/160ºC to 340ºF/171ºC. Can withstand temperatures up to 400ºF/202ºC.
For applications where molds are below 200ºF/93ºC, use MS-122 Series (aerosols) or MS-143 Series (bulk). Nonflammable. Contains no
silicones. No ODC (ozone depleting chemicals).
