As a Release Agent: An
excellent and economical universal release agent, highly effective when applied to rubber molds. Provides a very uniform
coating. NSN 9150-01-528-5624 (aerosol).
As a Dry Lubricant: Our best dry lubricant, for all applications. May
be used on all surfaces, especially where there is metal on metal contact. Provides a very uniform coating.
NSN 9150-01-528-5624 (aerosol).
MS-122AX (14oz
Aerosol)
A1229B (Qt, Gal, 5G, 55G)
As a Release Agent: A modified
version of MS-122AD that combines superior initial release action with up to 5 times the number of release cycles on metal molds.
Provides a very uniform coating. Not recommended for use on rubber molds.
As a Dry Lubricant: An excellent dry lubricant for
rubber on steel applications. Provides a very uniform coating. Not recommended as a dry lubricant for metal on metal.
MS-122RB (16oz
Aerosol)
As a Release Agent: Provides a heavier, slower drying coating which makes it suitable for intricate mold shapes. Works
well for most applications except as a release agent on rubber molds.
As a Dry Lubricant: A general purpose dry lubricant, good
for all applications.
MS-122XD (14oz Aerosol)
MS-143XD (Qt, Gal, 5G, 55G)
As a Release Agent: An excellent release
agent with the added advantage of superior release action in the initial cycles. Works well for all applications. Produces a uniform
coating.
As a Dry Lubricant: A very good general purpose dry lubricant for all applications. Produces a uniform coating.
